PDA

View Full Version : Shp pro block

CNC BLOCKS
11-02-2010, 06:21 PM
Got my Dart order in and had a chance to look over the Pro Block and so far have been pleased with what I saw and the mains were right in the middle, cam tunnel was right at 2.120 and the lifter bores were on the low side and depending whose lifters you are running they may have to be sized. To those who have asked about the studs on the outter splayed holes they are indeed 7/16 studs. Sonic test was very good!!

NOTE we have been seeing a lot of under size roller lifters lately and anyone who is building an engine should measure all the lifters and size the lifter bores accordingly.

Any one needing a specific picture of this block let me know!!
lun40119
11-02-2010, 06:33 PM
Finish it for a 4.130 piston, and send it to Denver NC..........Ill trade you and let you know how it works...........:) How did the cam tunnel look???
CNC BLOCKS
11-02-2010, 07:09 PM
Finish it for a 4.130 piston, and send it to Denver NC..........Ill trade you and let you know how it works...........:) How did the cam tunnel look???

Cam tunnel looked great and it was line honed to size. Very very nice block!!!!
lun40119
11-02-2010, 07:15 PM
They copied me with the BBC thing and the studs............I should get a cut...........;)
want-a-be
11-02-2010, 11:31 PM
They copied me with the BBC thing and the studs............I should get a cut...........;)

LOL,...I think you do Dart very good on the word of mouth advertising. Nothing better then that kind of support imo.

Don
lun40119
11-03-2010, 12:05 PM
LOL,...I think you do Dart very good on the word of mouth advertising. Nothing better then that kind of support imo.

Don

:) I do have a big mouth.......LOL. I told a guy on the bullet if he wasn't going to use Dart heads on his engine, that he had to paint it pink. :)
3V Performance
11-03-2010, 12:10 PM
If we could only get him to change that pic with a orange block. Thats soooo 1960's. lol lol
lun40119
11-03-2010, 12:28 PM
You painted it Battle ship grey...........Chevy engines are supposed to be orange. I thought it would have been cool to cover that beautiful shop in an orange haze............LOL.
chevman24
11-03-2010, 07:30 PM
I joined yellowbullet today. That site is crazy. You have to have thick skin to be on there, especially if you go in the politics section. Ill just have to avoid that section. Hope to get some info from the site though or I'll just resign.
lun40119
11-10-2010, 11:47 AM
I joined yellowbullet today. That site is crazy. You have to have thick skin to be on there, especially if you go in the politics section. Ill just have to avoid that section. Hope to get some info from the site though or I'll just resign.

Great site............I usually hang pretty close to the NA section. It is what I like. Pretty clean in their. Chris does a great job keeping it tidy.