ready to get it done

[jeepmanpow]

ok almost ready to get this new motor together,i need help on what spark plugs to use,where to set the timing,what fuel should i use,also where can i get a dipstick to fit the dart block,also should i use a oil filter relocation,or go with the stock oil filter.thanks for any help

[Awesome Bill]

Need to know what real compression the engine is, Not 14 :1 compression pistons, this means nothing. it could be any where from 12/1 /to 15/1. So get that checked first, usually we assemble one piston, install to tdc, put the head gasket on your using, torque it down and cc the engine. Get that # and I will help you with the correct plug and fuel and rpm! If the headers are tight, use the relocation unit. Dip stick? I don't know what you need a dip stick for? you planning on making a cross county trip with this thing? We plug them, most good oil pans have a bung for a dipstick that works, MOROSO!

[jeepmanpow]

is cc something i can do, the motor is together minus the intake,what do you use to plug the dipstick.thanks Bill

[Awesome Bill]

I don't think you could handle it at this point so let just say its 14-1. You could use the 110 VP purple fuel with 34-36° timing, but I would use the C12 Green Fuel with 36-38° timing. Spark plug would be AR3934-AR3933. You can plug that with any thing .002 larger than the hole. Small expansion plug is nice.