nitrous question

[rogera_58]

i have a 385 stroker with a eagle street and strip rotating assembly hyper piston -5cc, with dart 215cc iron eagle with 11:01 cr with a 3800 stall convertor with a comp cam 250 dur @ 50 540/540 lift intake/ exh 3500-6800 team g intake, 4:10 gear. DO you guy think this setup can handle a Nos power shot 125 plate kit. my other question is , i have a 10lb bottle how many pass do you thick it would last , and it has a wide open switch .



thanks

[Awesome Bill]

I will handle it with no problems as long as the tune up is correct. Anyone can melt pistons, this does not mean the pistons were bad. Anyone can run the engine way past its rpm limit and blow it up, this does not mean something was wrong, application is everything!