SBC oiling system

[prostreet34]

Using dart aluminum block (spread pan rail, no oil filter boss) for street car (427 c.i.) Planning on using moroso 20193 or maybe canton 13-090A oil pan , any other suggestions? Not using any restrictor plugs.

Should I use std. volume +10% or 25% because of extra plumbing for remote oil filter? Any thoughts on external filter, moroso 22285 (oberg type) or stay with screw on filter? Any remote mounts you can recommend?

[Awesome Bill]

Dart alu blocks have no provision for screw on filters neither do the Iron Eagle. Moroso makes a killer pan for this application and go with a full kick out and put the starter on the driver side. Pure Power remote filter is very good.

[prostreet34]

Thanks Bill, checked into pure power remote oil filter, looks like a nice piece. Whats your or anyone elses thought on oil pump volume because of remote filter and plumbing or does it not make a big differance. +10% or +25%?

[Awesome Bill]

With the aftermarket pan, the HV is always a good Idea. I use @10 or 12 line to plumb the remote. I have never had a problem