You have no items to compare.
Coatings
| Items 1 to 10 of 11 total |
Page:
|
Show per page |
Sort by:
|
DC1 Anti-Friction Coating
Starting at:
$0.00
Dart's DC1 Anti-Friction coating is a heat cured solid film lubricant, combining the load capacity of MOS2 and the low frictional properties of PTFE (Teflon Variant). This blend is specially formulated to perform as a secondary lubricant under conditions where oil is present.
Learn More
DC2 Reflective Heat Barrier
Starting at:
$0.00
Dart's DC2 Reflective Heat Barrier coating is a ceramic based blend that offers an effective method for controlling thermal engine issues.
Learn More
DC3 Engine Bearing Wearing Guard
Starting at:
$0.00
The DC3 coating has high load capacity and is formulated to create optimal surface to surface contact conditions for engine bearings and crankshaft, greatly extending the lifespan of these components.
Learn More
DC4 Lubricating Coating
Starting at:
$0.00
The DC4 coating greatly enhances wear life and load capacity where surface and subsurface fatigue due to abrasion, adhesion or corrosive wear are a concern.
Learn More
DC5 Oil Shedding Coating
Starting at:
$0.00
The DC5 coating is a PTFE (Teflon® Variant) base release agent, highly corrosion resistant and chemically inert. This coating is formulated to shed oil and other petroleum based lubricants rather than retain them.
Learn More
DC6 Alcohol/Methane Friction Protectant
Starting at:
$0.00
The DC6 formula lubricates and protects piston skirts, valve springs, engine bearings and other components in applications where alcohol or methanol would break down other coatings.
Learn More
DC7 Anti-Corrosive Coating
Starting at:
$0.00
Dart's DC7 coating addresses corrosion and oxidation problems that result from exposure to the weather, or from the presence of corrosive chemicals such as gasoline, alcohol, nitro methane, brake fluid, antifreeze and a number of other substances that can cause damage to important engine components.
Learn More
DC8 Marine Jacket Coating
Starting at:
$0.00
Dart's DC8 coating is a low cure temperature, alkyd based solution specifically designed to prevent salt water corrosion in marine applications.
Learn More
DC9 Marine Shield Treatment
Starting at:
$0.00
The DC9 treatment bonds with the surface layer of your aluminum components, sealing the fine pores on the metal's outer layer to provide unmatched protection.
Learn More
DC10 Hard Carbon
Starting at:
$0.00
The DC10 Hard Carbon coating is the ultimate answer to high load, high wear applications. DC10 is extremely hard, has a low coefficient of friction, a low elastic modulus, is corrosion resistant and is effective at high temperatures.
Learn More
| Items 1 to 10 of 11 total |
Page:
|
Show per page |
|
Sort by:
|